Skip To Content
ZERAI TECH

Industrial Energy & Efficiency

Power generation, cogeneration and energy systems for industrial cooling, heating and electricity demand, with equipment selection, efficiency improvements and project partnerships.

Gas Turbine Packages

Gas turbine packages, auxiliaries and controls selected for gas supply, load and operating mode.

Below 2 MW2–16 MW Class

Model, rating and supply scope are confirmed per project.

7 MW Gas Turbine Cutaway
7 MW Gas Turbine Cutaway

Industrial Power

Generating units and electrical systems for continuous duty, grid-connected or standalone operation.

Heat Recovery & Cogeneration

Exhaust heat supplies steam, hot water or compatible cooling systems for combined heat and power (CHP) or combined cooling, heat and power (CCHP).

Equipment & System Packages

Project-specific equipment supply and system packages, including turbines, auxiliaries, controls and supporting systems.

CHP & CCHP

Integrated generation and heat recovery provide power, heat and cooling to suit electricity, steam, hot water and cooling demand.

CCHP diagram with gas turbine, heat recovery boiler and absorption chiller
Gas-Fired CCHP System
View Full Diagram

Power

A gas turbine drives a generator for industrial and site loads.

Heat

A heat recovery boiler or heat exchanger converts exhaust heat into steam or hot water.

Cooling

Suitable heat sources drive absorption chillers for process or building cooling.

Biomass Power & Heat

Project development for biomass power, heat and cogeneration using agricultural, forestry and oil palm by-products.

Feedstock supply and loads guide gasification, boiler and generation systems, fuel planning, equipment selection and project partnerships.

Biomass gasification-to-power facility and transfer piping
Biomass Gasification-to-Power Facility
  1. Biomass FeedstockProcessing & Supply
  2. Gasification & Gas TreatmentSuitable Fuel Gas
  3. Power & Heat RecoveryPower & Recoverable Heat
  1. Biomass FeedstockFeedstock Compatibility
  2. Boiler & Steam SystemCombustion & Steam Production
  3. Heat or Steam PowerHeat Load & Scale

Heat Pumps & Heat Recovery

Upgrade low-grade process heat for industrial hot water or steam, integrating efficiency retrofits with existing cooling and heating systems.

Integrated high-temperature hot water and steam units, steam compression heat pumps and other equipment are selected for heat sources, target temperatures and process demand.

Industrial high-temperature hot water and steam unit
Industrial High-Temperature Hot Water & Steam Unit
  1. Low-Grade HeatProcess Waste Heat & Compatible Sources
  2. Industrial Heat PumpPower Input & Heat Upgrading
  3. Hot Water / SteamProcess Heat Demand

Distributed Energy & Microgrids

Site energy solutions can integrate solar photovoltaics (PV), energy storage systems (ESS), microgrids and power for electric equipment. Available power, loads and commercial terms guide equipment supply, system design and project partnerships.

Aerial view of industrial rooftop PV and park roads
Industrial Rooftop PV

Rooftop PV & Site Power

PV design reflects roof conditions, demand profiles and grid requirements, with coordinated operation alongside existing power sources.

Mobile energy storage with charging cables, connectors and control panel
Mobile Energy Storage

Mobile Storage & Site Support

Mobile storage and charging for portable power, backup and equipment charging, configured for site power, loads and interfaces.

Power Coordination

Coordinate PV, generators, external supply and ESS around available site power.

Distribution & Energy Management

Coordinate electrical interfaces, controls and protection for site operations.

Site Loads

Plan energy supply and use for production, site operations and equipment charging.

Powered by